Photocatalytic degradation of methylene blue under visible light by cobalt ferrite nanoparticles/graphene quantum dots

• Vo Chau Ngoc Anh,
• Le Thi Thanh Nhi,
• Le Thi Kim Dung,
• Dang Thi Ngoc Hoa,
• Nguyen Truong Son,
• Nguyen Thi Thao Uyen,
• Nguyen Ngoc Uyen Thu,
• Le Van Thanh Son,
• Le Trung Hieu,
• Tran Ngoc Tuyen and
• Dinh Quang Khieu

Beilstein J. Nanotechnol. 2024, 15, 475–489, doi:10.3762/bjnano.15.43

• synthesize cobalt ferrite nanoparticles/graphene quantum dots (CF/GQDs). The material was prepared from a homogeneous mixture of iron nitrate, cobalt nitrate, and starch at 140, 180 and 200 °C in a 24 h thermal hydrolysis process. The obtained materials were characterised by using X-ray diffraction, scanning

• electron microscopy, transmission electron microscopy, ultraviolet–visible diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, photoluminescence spectroscopy, vibrating-sample magnetometry, and nitrogen adsorption/desorption isotherms. Cobalt ferrite crystals of around 8–10 nm and

• degradation and other dyes. Keywords: cobalt ferrite; graphene quantum dots; methylene blue; Introduction Graphene quantum dots (GQDs) have unique properties, including photoluminescence, biocompatibility, slight chemical toxicity, inertness, and excellent photostability [1][2]. Graphene quantum dots

Biocompatibility and cytotoxicity in vitro of surface-functionalized drug-loaded spinel ferrite nanoparticles

• Sadaf Mushtaq,
• Khuram Shahzad,
• Tariq Saeed,
• Anwar Ul-Hamid,
• Bilal Haider Abbasi,
• Nafees Ahmad,
• Waqas Khalid,
• Muhammad Atif,
• Zulqurnain Ali and
• Rashda Abbasi

Beilstein J. Nanotechnol. 2021, 12, 1339–1364, doi:10.3762/bjnano.12.99

• vitro compared to free drug controls. The IC50 values ranged from 0.81 to 3.97 μg/mL for HepG2 and HT144 cells, whereas IC50 values for normal lymphocytes were 10 to 35 times higher (18.35–43.04 µg/mL). Cobalt ferrite (CFO) and zinc ferrite (ZFO) NPs were highly genotoxic (p < 0.05) in cancer cell lines

• adverse interactions with hemoglobin [13]. Magnetic spinel ferrites nanoparticles (MSFNPs) with a general formula of MFe2O4 (where M = divalent cation of Co, Ni, Zn, Mn, or Mg) are soft magnetic materials with a face-centered cubic structure [14]. Among those, cobalt ferrite NPs have a large

• cobalt ferrite (CFO), nickel ferrite (NFO), and zinc ferrite (ZFO) as compared to FeO due to the ionic radii difference of divalent M+2 cations. The peak shift also indicates the incorporation of M+2 cations into the lattice. Further confirmation of the crystalline nature of the composites was obtained

Advanced hybrid nanomaterials

• Andreas Taubert,
• Fabrice Leroux,
• Pierre Rabu and
• Verónica de Zea Bermudez

Beilstein J. Nanotechnol. 2019, 10, 2563–2567, doi:10.3762/bjnano.10.247

• critical importance of interfaces. In the current issue, from “simple” to more elaborated, we here observe the importance of the polyol method, the non-hydrolytic or colloidal approach, and ordered mesopore templating techniques. In “Tailoring the magnetic properties of cobalt ferrite nanoparticles using

The effect of magneto-crystalline anisotropy on the properties of hard and soft magnetic ferrite nanoparticles

• Hajar Jalili,
• Bagher Aslibeiki,
• Ali Ghotbi Varzaneh and
• Volodymyr A. Chernenko

Beilstein J. Nanotechnol. 2019, 10, 1348–1359, doi:10.3762/bjnano.10.133

• observed that the heat efficiency of soft Fe3O4 is about 4 times larger than that of hard CoFe2O4 ferrite, which was attributed to the high coercive field of samples compared with the external field amplitude. Keywords: anisotropy; cobalt; ferrite; Henkel plots; hyperthermia therapy; nanoparticles

• cobalt ferrite NPs by using a random anisotropy model. Their results showed that the overall magnetic properties are the equilibrium of the interplay between the interparticle interactions and the anisotropy of the single particles. The authors of this paper believe that this study is of fundamental

Tailoring the magnetic properties of cobalt ferrite nanoparticles using the polyol process

• Malek Bibani,
• Romain Breitwieser,
• Alex Aubert,
• Vincent Loyau,
• Silvana Mercone,
• Souad Ammar and
• Fayna Mammeri

Beilstein J. Nanotechnol. 2019, 10, 1166–1176, doi:10.3762/bjnano.10.116

• magnetic nanoparticles (NPs) must be highly magnetostrictive and magnetically blocked at room temperature despite their nanometer-size. We describe here the use of the polyol process to synthesize cobalt ferrite (CoxFe3−xO4) nanoparticles with controlled size and composition and the study of the

• piezoelectric polymers. Keywords: cobalt ferrite; magnetocrystalline anisotropy; magnetostriction; nanoparticle; non-stoichiometry; polyol process; Introduction Recently, extrinsically (or artificially) magnetoelectric (ME) multiferroic (MF) materials have been seriously investigated for many applications in

• ferromagnetic component as small as possible, while maintaining an efficient strain transmission (an amplitude of ca. 30 ppm is enough for many applications [11]). Currently, the size of such nanoparticles ranges above 30 nm in diameter. Bulk single crystalline cobalt ferrite, for instance, exhibits a

Methionine-mediated synthesis of magnetic nanoparticles and functionalization with gold quantum dots for theranostic applications

• Arūnas Jagminas,
• Agnė Mikalauskaitė,
• Vitalijus Karabanovas and
• Jūrate Vaičiūnienė

Beilstein J. Nanotechnol. 2017, 8, 1734–1741, doi:10.3762/bjnano.8.174

• application of Fe3O4@Met NPs for the adsorption of water pollutants. In this study, we report a novel synthesis protocol for superparamagnetic cobalt ferrite NPs capped with a biocompatible methionine shell (CoFe2O4@Met), which in turn is capable to reduce and attach the gold species. In this way, hybrid

• magneto-plasmonic cobalt ferrite NPs decorated with Au0/Au1+ quantum dots (QDs) were formed for the first time. The formation of plasmonic gold QDs at the surface of iron oxide-based NPs was confirmed by HRTEM, AFM, FTIR, XPS and chemical analysis. Results and Discussion Synthesis and characterization of

• methionine-functionalized cobalt ferrite nanoparticles A hydrothermal approach was applied to synthesize the superparamagnetic cobalt ferrite NPs stabilized with methionine. The proposed approach differs from the reported one [19] in the nature of magnetic NPs, the composition of the aqueous solution applied

Synthesis of graphene–transition metal oxide hybrid nanoparticles and their application in various fields

• Arpita Jana,
• Elke Scheer and
• Sebastian Polarz

Beilstein J. Nanotechnol. 2017, 8, 688–714, doi:10.3762/bjnano.8.74

Multiwalled carbon nanotube hybrids as MRI contrast agents

• Nikodem Kuźnik and
• Mateusz M. Tomczyk

Beilstein J. Nanotechnol. 2016, 7, 1086–1103, doi:10.3762/bjnano.7.102

• (SPIO/oMWCNT#Wu) [38], while Wang used the thermal annealing method of iron(II) acetate (SPIO/oMWCNT#Wang) [43]. Solvothermal co-precipitation of CoCl2 and FeCl3, also by Wu, led to the non-covalent deposition of magnetic cobalt ferrite (CoFe2O4/oMWCNT#Wu) [39]. It was found that a low temperature (180

Hemolysin coregulated protein 1 as a molecular gluing unit for the assembly of nanoparticle hybrid structures

• Tuan Anh Pham,
• Andreas Schreiber,
• Elena V. Sturm (née Rosseeva),
• Stefan Schiller and
• Helmut Cölfen

Beilstein J. Nanotechnol. 2016, 7, 351–363, doi:10.3762/bjnano.7.32

• gluing unit for the assembly of often linear, hybrid structures of plasmonic gold (Au NP), magnetite (Fe3O4 NP), and cobalt ferrite nanoparticles (CoFe2O4 NP). Furthermore, the assembly of Au NPs into linear structures using Hcp1_cys3 is investigated by UV–vis spectroscopy, TEM and cryo-TEM. One key

• Hcp1_cys3 as a connecting unit is extended to magnetite NPs (Fe3O4 NPs) and cobalt ferrite NPs (CoFe2O4 NPs). The synthesis of magnetite NPs with a size of about 8 nm and the ligand exchange followed the protocol of Cabrera et al. [36], with results as shown in the TEM images of Figure S4, Supporting

• the blank Fe3O4 NPs. A third NP system demonstrates that our concept of the utilization of Hcp1_cys3 as a gluing unit between the NPs to fabricate a linear structure is universal. We synthesized cobalt ferrite NPs (CoFe2O4 NPs) following the protocol of Cabrebra [36] and exchanged the oleic acid

Predicting cytotoxicity of PAMAM dendrimers using molecular descriptors

• David E. Jones,
• Hamidreza Ghandehari and
• Julio C. Facelli

Beilstein J. Nanotechnol. 2015, 6, 1886–1896, doi:10.3762/bjnano.6.192

• techniques in this field. For instance, Liu et al. analyzed a number of attributes of a variety of nanoparticles in order to predict the 24 hour postfertilization mortality in zebrafish [3]. Horev-Azaria and colleagues used predictive modeling to explore the effect of cobalt–ferrite nanoparticles on the

Proinflammatory and cytotoxic response to nanoparticles in precision-cut lung slices

• Stephanie Hirn,
• Nadine Haberl,
• Kateryna Loza,
• Matthias Epple,
• Wolfgang G. Kreyling,
• Barbara Rothen-Rutishauser,
• Markus Rehberg and
• Fritz Krombach

Beilstein J. Nanotechnol. 2014, 5, 2440–2449, doi:10.3762/bjnano.5.253

• , there are only a few studies using PCLS in the field of nanotoxicology, yet. It was demonstrated that solid lipid NPs induced a cytotoxic response in PCLS, but only at very high concentrations (1 mg/mL and higher) [15][16][17][18]. Wohlleben et al. reported that a cobalt ferrite nanomaterial elicited a

Manipulation of isolated brain nerve terminals by an external magnetic field using D-mannose-coated γ-Fe₂O₃ nano-sized particles and assessment of their effects on glutamate transport

• Tatiana Borisova,
• Natalia Krisanova,
• Arsenii Borуsov,
• Roman Sivko,
• Ludmila Ostapchenko,
• Michal Babic and
• Daniel Horak

Beilstein J. Nanotechnol. 2014, 5, 778–788, doi:10.3762/bjnano.5.90

• have a potential to cross the blood brain barrier that may open new ways for drug delivery into the brain [22]. Cobalt ferrite nanoparticles coated by silica, with a size of 50 nm, were found in the brain after being administered via an intravenous injection in mice [23]. After exposure of mice to TiO2

Oriented attachment explains cobalt ferrite nanoparticle growth in bioinspired syntheses

• Annalena Wolff,
• Walid Hetaba,
• Marco Wißbrock,
• Stefan Löffler,
• Nadine Mill,
• Katrin Eckstädt,
• Axel Dreyer,
• Inga Ennen,
• Norbert Sewald,
• Peter Schattschneider and
• Andreas Hütten

Beilstein J. Nanotechnol. 2014, 5, 210–218, doi:10.3762/bjnano.5.23

• cobalt ferrite nanoparticles in a bioinspired synthesis was studied. Bioinspired syntheses have sparked great interest in recent years due to their ability to influence and alter inorganic crystal growth and therefore tailor properties of nanoparticles. In this synthesis, a short synthetic version of the

• protein MMS6, involved in nanoparticle formation within magnetotactic bacteria, was used to alter the growth of cobalt ferrite. We demonstrate that the bioinspired nanoparticle growth can be described by the oriented attachment model. The intermediate stages proposed in the theoretical model, including

• diffraction measurements. The change of particle diameter with time agrees with the recently proposed kinetic model for oriented attachment. Keywords: bioinspired synthesis; cobalt ferrite nanoparticles; nanoparticle growth; oriented attachment; polypeptide; Introduction Nanoparticles with a well-controlled

Review and outlook: from single nanoparticles to self-assembled monolayers and granular GMR sensors

• Alexander Weddemann,
• Inga Ennen,
• Anna Regtmeier,
• Camelia Albon,
• Annalena Wolff,
• Katrin Eckstädt,
• Nadine Mill,
• Michael K.-H. Peter,
• Jochen Mattay,
• Carolin Plattner,
• Norbert Sewald and
• Andreas Hütten

Beilstein J. Nanotechnol. 2010, 1, 75–93, doi:10.3762/bjnano.1.10

• the C-terminal region of Mms6. In this study, cobalt ferrite nanoparticles not known to occur in magnetotactic bacteria were synthesized. Cobalt and iron salts were added to the c25-mms6 mixture and incubated at 4 °C. The mixture was stirred under argon flux until it reached room temperature and then